Building A Better Bathroom - How To Install A New Shower Unit

Building A Better Bathroom - How To Install A New Shower Unit

Blog Article

Need Help? Hire Us Now!

The publisher is making a number of good points about How to Build a Shower Enclosure for Your DIY Bathroom overall in this great article beneath.

A successful shower setup calls for careful preparation and also a lot of work. Most of the times, you will need to do 3 types of tasks: mounting walls, setting up the plumbing, and also finishing walls.

Prep work

Firstly, you need to select the sort of shower that you want to set up. It is very important to identify whether the chosen shower can coping with specific systems and also can regulate a risk-free degree of water with the central heating boiler. Most shower systems nowadays are made to be flexible to different water stress (such as stored hot water and also cold keys).
It is additionally important to consider the water stress and the planning of the piping as well as water drainage for the shower

Different Kinds Of Shower Units

Push-on Mixer: The tube and spray parts of the push-on mixer shower system can be attached to the bathroom tap according to your need, and the water temperature can be changed using the taps. Push-on mixers are cheap and extremely straightforward to set up. Nonetheless, although the hose connection is basic, it is conveniently dislodged. Additionally, it is inconvenient to adjust the temperature.

Bath/Shower Mixer: The hose pipe as well as spray of this kind of shower are incorporated with a bathroom mixer tap, and the temperature can be changed with the bathroom faucets. It is a really cheap option and no additional plumbing is included. Nevertheless, the bath/shower mixers likewise deal with bothersome temperature level control options.

Manual Mixer: The hose pipe as well as spray of a hands-on mixer shower system belong of the wall surface system as well as the cold and hot water materials are attached to a solitary shutoff The temperature level and also stress of the water are managed with either one or a range of handles (in a lot more costly showers). Although temperature level control is a lot easier in manual mixer types, they are much more expensive than the previously mentioned mixers. They additionally call for added plumbing of cold and hot water system pipelines.

Thermostatic Mixer: The pipe as well as spray of this shower type are a part of the wall device and also the cold and hot water products are attached to a solitary valve here too. It is full with an integrated stabiliser to self-adjust the water temperature level as well as to avoid it from becoming too warm. Among the greatest advantages of a thermostatic mixer shower type includes hassle-free temperature level control. Nevertheless, it is the most expensive of the various mixer alternatives.

Power Shower: A power shower is a single unit containing an effective electrical pump that is capable of altering both the water stress as well as temperature. This type of shower can be fitted if there is water from a cold water tank as well as a hot water cyndrical tube. A power shower makes the modification of both pressure and also temperature level simple. On the other hand, it is unsuitable for water warmed directly by the shower or where the water is supplied by a mix boiler under mains stress.

Electric Shower: An electrical shower is plumbed right into a mains cold water supply and it heats the water electrically. It is necessary to keep in mind that for this shower type to be installed, the keys stress needs to be at least 0.7 kg/sq cm (10lb/sq in). The device enables the temperature and stress to be changed through a handle. Versions with temperature stabilisers are better as they continue to be untouched by other faucets somewhere else in use within the house. A significant drawback of electrical showers is that the control handle only permits the choice of high temperatures at much less pressure, or lower temperature levels at a greater stress. This is problematic in the winter when the spray is frequently weak and also the mains water is cooler. However, this trouble is tackled in some versions which are available with a winter/summer setup.

Method

Depending on the sort of shower you want to mount, the shower head need to either be fitted in order to prevent its contact with the water in the bath listed below or the base tray, or it should have a check shutoff.
Before beginning, it is recommended to note the settings of the shower head and also control, as well as to plan the pipe-work included. Additionally, the drain system to get rid of the waste water will certainly need to be intended. Both positions of the cable television course and the shower button will additionally need to be taken into consideration if an instantaneous or electrical shower unit is being set up.
Make use of the instruction overview given with the shower system to fit the shower control.Before suitable the pipes that will supply the water to the shower system, it is necessary to cut off the water system. In order to protect the pipes, they need to be given a water resistant covering as well as also fitted with isolating valves. The pipelines can after that be hidden right into the wall and glued over to neaten the general appearance.
Fit the base tray, shower head, and also fittings.
Connect the primary shower control to the pipelines that will certainly be providing the water (This might require a female screw thread adapter).
Reconnect the supply of water as well as examination the pipelines for any kind of leakages, as some may need tightening.
If you are setting up an electrical shower, keep in mind to turn off the power supply prior to making any kind of electric connections. Once these connections have been made (there should be assistance within the instruction manual), the power supply can be changed back on.

Changing Water Pressure to Fit Your Shower

The cold water tank can be lifted to a higher height (in some cases as little as 150mm (6inches)) by fitting a strong wooden assistance under it - perhaps made up of struts and blockboards. If you choose this option, the primary as well as circulation pipelines will certainly additionally need to be elevated to fulfill the brand-new elevation of the storage tank.
Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is chosen, it must be connected into the power supply in order to operate.

Piping and Drainage

It is best to use 15mm diameter supply pipes, and make the runs to the shower as short and straight as possible so regarding keep optimal stress and also reduce warm loss. Furthermore, by minimising the use of elbows for pipeline edges, you can reduce the resistance in the flow of the water supply. You can attain this by flexing the pipes instead.

The Majority Of Usual Errors

Going against or overlooking regional code restrictions.

Using pipelines that are as well small.

Affixing copper to galvanized without utilizing a brass or dielectric fitting between both.

Not utilizing tape or pipe substance at threaded joints.

Not leveling your fixtures when mounting them.

Not setting up an air gap loading for fixtures.

Cutting supply stub outs also short to install the shutoff valves onto after the ended up wall remains in area.

Not correctly aligning tubes into installations or stop valves. (Compeling the nut onto the compression ring at an angle when the tubing goes to an angle will cause a leakage.).

When turning the water back on in your house, always run the outdoors hose pipe valve or purge your toilets to hemorrhage dirt and also air from the lines. This debris can create issues in your sink taps as well as other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

We had been introduced to that write-up about How to Install a One-Piece Shower Unit through someone on our other blog. Enjoyed our article? Please share it. Let others find it. We love reading our article about Simple ways to Install a Shower Cubicle on Your Own.

Explore Now

Report this page